E2SS-MC1 2M

Ordering Information Sensors Mounting Brackets E2SS-M E2SS-W  Model Connection method Series Series PNP output NPN output Pre-wired E2SS-MC1 2M Pre-wired connector E2SS-MC1-M1J 0.3M E2SS-MB1-M1J 0.3M Connector E2SS-WC1-P1 Applicable cylinders Round E2SS-MB1 2M E2SS-WB1-P1 Tie-rod E2SS-M Cylinder diameter or groove width Model 8 to 25 mm dia. E2SS-MR1 25 to 63 mm dia. E2SS-MR2 32 to 40 mm dia. E2SS-MT1 50 to 63 mm dia. E2SS-MT2 80 to 100 mm dia. E2SS-MT3 160 to 200 mm dia. E2SS-MT4 N E W Cylinder Sensor E2SS T-groove Not necessary (mounted directly) 7 mm E2SS-M Series E2SS-MV1 Dovetail- 9.4 mm groove 11.5 mm E2SS-W Series E2SS-MV2 E2SS-MV3 12.6 mm E2SS-W T-groove or dovetail-groove E2SS-MV4 E2SS-WV1 − Mounts to Any Type of Cylinder I/O Circuit Diagrams NPN output Sensor Cylinder Switching point E2SS- ■C1(-M1J/-P1) ＋V Load Sensor main circuits Magnet inside of cylinder Symbol Non-detection Detection Non-detection area area area ON Operation Control output indicator (yellow) 0V Control output OFF ＋V Meaning M Standard model W Magnetic field immune model ON OFF PNP output E2SS- ■B1(-M1J/-P1) Sensor Cylinder Switching point Magnet inside of cylinder Non-detection Detection Non-detection area area area Operation ON Control output Sensor main circuits E2SS- ■C1(-M1J/-P1) E2SS- ■B1(-M1J/-P1) indicator (yellow) Load Control output 0V OFF ON OFF Safety Precautions M12 Connector Pin Layout WARNING E2SS-M■1-M1J: Pin 2 is not used. Applicable OMRON Connecting Cable: XS2F Series This product is not designed or rated for ensuring safety of persons. Do not use it for such purposes. E2SS-W■1-P1: There is no pin 2. Applicable OMRON Connecting Cable: XS2F Series Never use this product with an AC power supply. Otherwise, explosion may result. OMRON Corporation Industrial Automation Company Authorized Distributor: Tokyo, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Sensor Business Unit Carl-Benz-Str. 4, D-71154 Nufringen, Germany Tel: (49) 7032-811-0/Fax: (49) 7032-811-199 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 © OMRON Corporation 2009 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Printed in Japan Cat. No. D109-E1-01 1009 Ratings/Performance Cylinder Sensor Standard Models: E2SS-M Series E2SS Indicator 6 One shape of Sensor mounts to all types of cylinders. This greatly reduces stocked items and makes product selection easier. 28 5 3 dia. 31 2.5 Hexagon-head screw size (Unit: mm) Magnetic Field Immune Models*: E2SS-W Series M12×1 10 11.5 Reduce Stocked Items One shape of Sensor for all types of cylinders. Round cylinders Tie-rod cylinders Sensor Sensor Indicator Just select a Mounting Bracket to mount the Sensor to any of four types of cylinders. You do not need to stock Sensors for each type of cylinder. One shape of Sensor is all that is required. This also simplifies selecting a Sensor model. 17 28 (Unit: mm) * These models prevent malfunction in environments in which AC T-groove cylinders Sensor welding is being performed. The Sensor will hold the ON or OFF control output condition when subjected to an AC magnetic field of 50 to 60 Hz and 10 to 100 mT. When the field subsides, the Sensor returns to normal operation. (Standard models will malfunction under magnetic field noise of approximately 1 mT or higher.) Dovetail-groove cylinders Sensor M o u n t s t o A n y Ty p e o f C y l i n d e r ! Cylinder Mount the Sensor simply by turning a Hexagon-head screw approximately 90°.* All you need is an L-shaped Hexagon wrench to mount the Sensor even when there is limited space above it. Mounting is simple even in narrow spaces. E2SS-W Series Item E2SS-MC1(-M1J) Power supply voltage 10 to 30 VDC (including ripple(p-p):10%) E2SS-MB1(-M1J) E2SS-WC1-P1 Detection sensitivity (magnetic sensitivity) 2.8 mT max. E2SS-WB1-P1 Current consumption 15 mA max. Hysteresis 1 mm max. Repeat accuracy ±0.1 mm max. Pass speed 10 m/s max. 1 m/s max. Switching frequency 1 kHz max. 20 Hz max. Control Switching capacity output Residual voltage 150 mA max. 100 mA max. 2 V max. (Load current: 150 mA, Cable length: 2 m) 2 V max. (Load current: 100 mA, Cable length: 2 m) Indicator Operation indicator (yellow) Operation mode NPN open-collector, NO (normally open) Protective circuits Power supply reverse polarity protection, output reverse polarity protection, and load short-circuit protection Ambient temperature Operating/Storage: −25 to 70°C (with no icing or condensation) Ambient humidity Operating/Storage: 35% to 95% (with no condensation) Insulation resistance 50 MΩ min. (at 500 VDC) between charged parts and case Dielectric strength 500 VAC, 50/60 Hz for 1 min between charged parts and case Vibration resistance (endurance) 10 to 55 Hz with 1.0-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance (endurance) 300 m/s 2 10 times each in X, Y, and Z directions PNP open-collector, NO (normally open) NPN open-collector, PNP open-collector, NO (normally open) NO (normally open) Degree of protection IEC 60529 IP67 Connection method Blank: Pre-wired (standard cable length: 2 m) -M1J: Pre-wired M12 connector (cable length: 0.3 m) M12 connector Weight (when packed) Pre-wired models: Approx. 35 g Pre-wired M12 connector models: Approx. 30 g Approx. 25 g Materials Case: PP, Cable: PUR Case: PA, Connector: PA Accessories Instruction Manual, cable clip (one) Instruction Manual, mounting screw (one) Applicable Cylinders and Mounting Brackets for E2SS-M Series Round cylinders Name Easier Mounting E2SS-M Series Model Tie-rod cylinders T-groove cylinders Dovetail-groove cylinders Groove width 5 to 5.4 mm Appearance 3.2 to 3.7 mm 6.3 to 6.8 mm E2SS-MR1 8 to 25 mm dia. E2SS-MT1 32 to 40 mm dia. Model E2SS-MV1 Groove width 7mm E2SS-MR2 Model *Approximately one full turn is required for some shapes of groove. Mounting Bracket Approx. 90° Cylinder diameter Model Cylinder diameter * Model 2 25 to 63 mm dia. E2SS-MT2 50 to 63 mm dia. E2SS-MV2 9.4mm − − E2SS-MT3 80 to 100 mm dia. E2SS-MV3 11.5mm − − E2SS-MT4 *1 160 to 200 mm dia. E2SS-MV4 12.6mm Not necessary (mounted directly) Appearance *1 The appearance of the E2SS-MT4 is different. Mount in groove. Sensor mounted to cylinder Secure. Tie-rod diameter Sensor Sensor Mount the Sensor simply by turning a Hexagon-head screw approximately 90°. Mount the Sensor using an L-shaped Hexagon wrench even in spots where a screwdriver does not fit. Easy Onsite Operation Confirmation Operating condition is confirmable at a glance. The operation indicator can be seen from a 180° view range so that you can easily check the operating condition from any angle during mounting work or during system operation. Cylinder tube Sensor Sensor 2 The * E2SS-MR■ can be mounted to the cylinder tubes of some tie-rod cylinders, depending on the shape of the cylinders. When selecting the E2SS-MT■ , make sure that the following condition is met for the diameter of tie-rod. E2SS-MT1: 7 mm max. E2SS-MT2: 9 mm max. E2SS-MT3: 11 mm max., and E2SS-MT4: 16 mm max. Applicable Cylinders and Mounting Brackets for E2SS-W Series Switching point Name Cylinder T-groove cylinders Dovetail-groove cylinders 5 to 5.4 mm Appearance 3.2 to 3.7 mm E2SS-M Series E2SS-W Series Groove width 7 to 12.6 mm 6.3 to 6.8 mm From the Top Mounting Bracket E2SS-WV1 2.85 Switching point Appearance 8.5 180° Name From the Side 17.5 Sensor mounted to cylinder From the Top or the Side, an Easy-to-see Operation Indicator Switching point (Unit: mm) Ratings/Performance Cylinder Sensor Standard Models: E2SS-M Series E2SS Indicator 6 One shape of Sensor mounts to all types of cylinders. This greatly reduces stocked items and makes product selection easier. 28 5 3 dia. 31 2.5 Hexagon-head screw size (Unit: mm) Magnetic Field Immune Models*: E2SS-W Series M12×1 10 11.5 Reduce Stocked Items One shape of Sensor for all types of cylinders. Round cylinders Tie-rod cylinders Sensor Sensor Indicator Just select a Mounting Bracket to mount the Sensor to any of four types of cylinders. You do not need to stock Sensors for each type of cylinder. One shape of Sensor is all that is required. This also simplifies selecting a Sensor model. 17 28 (Unit: mm) * These models prevent malfunction in environments in which AC T-groove cylinders Sensor welding is being performed. The Sensor will hold the ON or OFF control output condition when subjected to an AC magnetic field of 50 to 60 Hz and 10 to 100 mT. When the field subsides, the Sensor returns to normal operation. (Standard models will malfunction under magnetic field noise of approximately 1 mT or higher.) Dovetail-groove cylinders Sensor M o u n t s t o A n y Ty p e o f C y l i n d e r ! Cylinder Mount the Sensor simply by turning a Hexagon-head screw approximately 90°.* All you need is an L-shaped Hexagon wrench to mount the Sensor even when there is limited space above it. Mounting is simple even in narrow spaces. E2SS-W Series Item E2SS-MC1(-M1J) Power supply voltage 10 to 30 VDC (including ripple(p-p):10%) E2SS-MB1(-M1J) E2SS-WC1-P1 Detection sensitivity (magnetic sensitivity) 2.8 mT max. E2SS-WB1-P1 Current consumption 15 mA max. Hysteresis 1 mm max. Repeat accuracy ±0.1 mm max. Pass speed 10 m/s max. 1 m/s max. Switching frequency 1 kHz max. 20 Hz max. Control Switching capacity output Residual voltage 150 mA max. 100 mA max. 2 V max. (Load current: 150 mA, Cable length: 2 m) 2 V max. (Load current: 100 mA, Cable length: 2 m) Indicator Operation indicator (yellow) Operation mode NPN open-collector, NO (normally open) Protective circuits Power supply reverse polarity protection, output reverse polarity protection, and load short-circuit protection Ambient temperature Operating/Storage: −25 to 70°C (with no icing or condensation) Ambient humidity Operating/Storage: 35% to 95% (with no condensation) Insulation resistance 50 MΩ min. (at 500 VDC) between charged parts and case Dielectric strength 500 VAC, 50/60 Hz for 1 min between charged parts and case Vibration resistance (endurance) 10 to 55 Hz with 1.0-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance (endurance) 300 m/s 2 10 times each in X, Y, and Z directions PNP open-collector, NO (normally open) NPN open-collector, PNP open-collector, NO (normally open) NO (normally open) Degree of protection IEC 60529 IP67 Connection method Blank: Pre-wired (standard cable length: 2 m) -M1J: Pre-wired M12 connector (cable length: 0.3 m) M12 connector Weight (when packed) Pre-wired models: Approx. 35 g Pre-wired M12 connector models: Approx. 30 g Approx. 25 g Materials Case: PP, Cable: PUR Case: PA, Connector: PA Accessories Instruction Manual, cable clip (one) Instruction Manual, mounting screw (one) Applicable Cylinders and Mounting Brackets for E2SS-M Series Round cylinders Name Easier Mounting E2SS-M Series Model Tie-rod cylinders T-groove cylinders Dovetail-groove cylinders Groove width 5 to 5.4 mm Appearance 3.2 to 3.7 mm 6.3 to 6.8 mm E2SS-MR1 8 to 25 mm dia. E2SS-MT1 32 to 40 mm dia. Model E2SS-MV1 Groove width 7mm E2SS-MR2 Model *Approximately one full turn is required for some shapes of groove. Mounting Bracket Approx. 90° Cylinder diameter Model Cylinder diameter * Model 2 25 to 63 mm dia. E2SS-MT2 50 to 63 mm dia. E2SS-MV2 9.4mm − − E2SS-MT3 80 to 100 mm dia. E2SS-MV3 11.5mm − − E2SS-MT4 *1 160 to 200 mm dia. E2SS-MV4 12.6mm Not necessary (mounted directly) Appearance *1 The appearance of the E2SS-MT4 is different. Mount in groove. Sensor mounted to cylinder Secure. Tie-rod diameter Sensor Sensor Mount the Sensor simply by turning a Hexagon-head screw approximately 90°. Mount the Sensor using an L-shaped Hexagon wrench even in spots where a screwdriver does not fit. Easy Onsite Operation Confirmation Operating condition is confirmable at a glance. The operation indicator can be seen from a 180° view range so that you can easily check the operating condition from any angle during mounting work or during system operation. Cylinder tube Sensor Sensor 2 The * E2SS-MR■ can be mounted to the cylinder tubes of some tie-rod cylinders, depending on the shape of the cylinders. When selecting the E2SS-MT■ , make sure that the following condition is met for the diameter of tie-rod. E2SS-MT1: 7 mm max. E2SS-MT2: 9 mm max. E2SS-MT3: 11 mm max., and E2SS-MT4: 16 mm max. Applicable Cylinders and Mounting Brackets for E2SS-W Series Switching point Name Cylinder T-groove cylinders Dovetail-groove cylinders 5 to 5.4 mm Appearance 3.2 to 3.7 mm E2SS-M Series E2SS-W Series Groove width 7 to 12.6 mm 6.3 to 6.8 mm From the Top Mounting Bracket E2SS-WV1 2.85 Switching point Appearance 8.5 180° Name From the Side 17.5 Sensor mounted to cylinder From the Top or the Side, an Easy-to-see Operation Indicator Switching point (Unit: mm) Ordering Information Sensors Mounting Brackets E2SS-M E2SS-W  Model Connection method Series Series PNP output NPN output Pre-wired E2SS-MC1 2M Pre-wired connector E2SS-MC1-M1J 0.3M E2SS-MB1-M1J 0.3M Connector E2SS-WC1-P1 Applicable cylinders Round E2SS-MB1 2M E2SS-WB1-P1 Tie-rod E2SS-M Cylinder diameter or groove width Model 8 to 25 mm dia. E2SS-MR1 25 to 63 mm dia. E2SS-MR2 32 to 40 mm dia. E2SS-MT1 50 to 63 mm dia. E2SS-MT2 80 to 100 mm dia. E2SS-MT3 160 to 200 mm dia. E2SS-MT4 N E W Cylinder Sensor E2SS T-groove Not necessary (mounted directly) 7 mm E2SS-M Series E2SS-MV1 Dovetail- 9.4 mm groove 11.5 mm E2SS-W Series E2SS-MV2 E2SS-MV3 12.6 mm E2SS-W T-groove or dovetail-groove E2SS-MV4 E2SS-WV1 − Mounts to Any Type of Cylinder I/O Circuit Diagrams NPN output Sensor Cylinder Switching point E2SS- ■C1(-M1J/-P1) ＋V Load Sensor main circuits Magnet inside of cylinder Symbol Non-detection Detection Non-detection area area area ON Operation Control output indicator (yellow) 0V Control output OFF ＋V Meaning M Standard model W Magnetic field immune model ON OFF PNP output E2SS- ■B1(-M1J/-P1) Sensor Cylinder Switching point Magnet inside of cylinder Non-detection Detection Non-detection area area area Operation ON Control output Sensor main circuits E2SS- ■C1(-M1J/-P1) E2SS- ■B1(-M1J/-P1) indicator (yellow) Load Control output 0V OFF ON OFF Safety Precautions M12 Connector Pin Layout WARNING E2SS-M■1-M1J: Pin 2 is not used. Applicable OMRON Connecting Cable: XS2F Series This product is not designed or rated for ensuring safety of persons. Do not use it for such purposes. E2SS-W■1-P1: There is no pin 2. Applicable OMRON Connecting Cable: XS2F Series Never use this product with an AC power supply. Otherwise, explosion may result. OMRON Corporation Industrial Automation Company Authorized Distributor: Tokyo, JAPAN Contact: www.ia.omron.com Regional Headquarters OMRON EUROPE B.V. Sensor Business Unit Carl-Benz-Str. 4, D-71154 Nufringen, Germany Tel: (49) 7032-811-0/Fax: (49) 7032-811-199 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200 © OMRON Corporation 2009 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. CSM_1_1_1109 Printed in Japan Cat. No. D109-E1-01 1009